optex TC-10U User Manual

1

2

3

Door/

Window

Wall

Door/

Window

Wall

0851Q

5915570

5-8-12 Ogoto Otsu
Shiga 520-0101
JAPAN
TEL:+81-77-579-8670
FAX:+81-77-579-8190
URL:http://www.optex.co.jp/e/

TEL:+1-909-993-5770

Tech:(800)966-7839 

URL:http://www.optexamerica.com

TEL:+82-2-719-5971

URL:http://www.optexkorea.com

TEL:+48-22-598-06-55

URL:http://www.optex.com.pl

TEL:+86-755-33302950

URL:http://www.optexchina.com

TEL:+44-1628-631000

URL:http://www.optexeurope.com

TEL:+33-437-55-50-50

URL:http://www.optex-security.com

Unit: inches (mm)

• Press Switch 1 of 

the receiver until 

the power 

indicator starts 

flashing.

• Press switch 2 to 

select the zone 

you wish to assign 

to the sensor.

• Separate the magnet unit from transmitter unit.

• Verity that the receiver 

has learned 

successfully by 

observing the zone 

indicators of the 

receiver. Zone 

indicators should have 

stopped flashing and 

remain continuously on.

• After teaching all the 

transmitter’s codes (if 

you have multiple 

transmitters), return the 

receiver to normal 

operating status.

• Make sure that the 

receiver operates 

correctly with all the 

transmitters.

Cover the TC-10U until you are 

ready to teach the receiver. 

Unwanted detection can cause 

the TC-10U to be assigned to the 

wrong zone and override the data 

of other transmitters.

After installation, door/window open and close.

And confirm the receiver weather it is received.

Does the status indicator light up when 

you remove transmitter unit from 

wallplate?

If not, check to see if the battery is inserted correctly. 

Otherwise try a new battery.
The magnet unit away by enough distance?

Please separate it by 0.6 inch (15 mm).

Is the status indicator flashing? 

The battery is old. Replace the battery.

Is the power indicator of the receiver lit? 

Is the receiver on? Check the wiring, power switch 

and connection.

The receiver does not respond to the TC-

10U. 

The TC-10U is not properly recognized by the 

receiver. Teach the receiver correctly.

The zone indicator of the receiver is on, 

but nothing happens. 

Receiver has not been properly setup. 

Refer to the receiver’s manual and verify the setting.

Is there anything blocking the 

transmission? 

Relocate the receiver and/or the TC-10U. 

Metal objects can shorten the effective transmission 

range.

It does not transmitting.

Does it makes between Transmitter unit and Magnet 

unit within 0.2 inch (5 mm)?
Is its distance more than transmission range to 

receiver? Please use repeater.

Before contacting the supplier!

Remove the battery, then reinsert the new batteries 

and verify the TC-10U’s operation again.

• If the above solutions do not work, please contact your supplier for services.

Description

Status Indicator

Power Source

Battery Life

Frequency

Input terminal

Operating Temp.

Installation Location

Accessories

Weight

Door/Window Transmitter

Red LED

3V:CR123 lithium battery (not include)

2years [100 times per day at 70°F (20°C)]

418MHz

Our battery operated detector only

15°F ~ 120°F (-10°C ~ +50°C)

Indoor / Outdoor where don’t have rain direct.

Double stick tape × 3, Screw × 4, Rubber Washer × 2

2.5oz (70g)  (not included battery)

Specifications may change without notice

(1) This Sensor Transmitter is warranted to the original consumer purchaser to be free from defects in material 

and workmanship under normal use for one (1) year from the date of purchase. If the product proves to be 

defective, return it postage prepaid with a copy of your dated sales receipt for repairs or replacement 

without charge.

(2) This warranty is in lieu of any and all other warranties, whether expressed or implied, including but not 

limited to any warranty of merchantability or fitness for a particular purpose.

(3) This warranty is invalid under the following circumstances:

• Mechanical or electrical modification(s) are made to the product or it is otherwise altered manually.

• The product is already been serviced at place(s) other than the manufacturer.

• It is determined that the product malfunction has resulted from improper use or from an accident.

• No copy of the dated sales receipt has been submitted together with the product to be serviced.

1. Remove the Front cover 

as shown.

2. Insert batteries.

    Observe polarity.

    (+/- direction)

3. To replace the cover.

*confirm its closed surely

• When the power is low, Status indicator starts 

flash.

  Replace the battery in such case.

• Low power may become the cause of false 

alarm.

• There is no need to readjust the TC-10U nor 

the receiver after replacing battery.

• Don’t throw the battery in the fire because 

there is the explosion hazard.

Put the double stick 

tape as shown. 

Clean the installation positions before 

installing them.

Install the transmitter unit on the wall.

Install the magnet unit on the door or window.

*Align the magnet unit within  0.2 inch (5 mm).

Install the transmitter unit on the wall with rubber washer and mounting screws (two places).

Install the magnet unit on the door or window with mounting screws.
*If it is without rubber washer, it will lost weatherproof structure.

*Align the magnet unit within  0.2 inch (5mm).

To put back the cover.

1.8 (45)

0.6 (15)

3.1 (79)

0.85 (21.7)

0.95 (24.2)

0.95 (24.2)

1.5 (36.7)

1.0 (24)

knockout

Rubberwasher