Shure AXT210C User Manual

3

<Link status>
 000.000 MHz

}

|

00.00

2

3

4

6

5

1

6

7

Axient transmitters are powered by a Shure lithium-ion rechargeable 

battery. 

Caution: Turn off the transmitter before changing batteries. 

Note: Refer to your  battery charger manual for charging instructions. 

Battery runtime varies according to the transmitter’s operating mode. 

Higher power settings will reduce battery runtime. 
Remaining battery runtime is shown on the display in the form of a bat-
tery indicator icon and approximate time in hours and minutes.

 

Tips for achieving maximum runtime: 
•  Use fully charged batteries 
•  Use the lowest power setting if possible
•  Turn off the transmitter when not in use 

1

1

The main menu screen displays the following transmitter parameters: 

•  Linked : Displays linked receiver ID 
•  Unlinked : Not linked to a receiver 

Tuned frequency of the transmitter 

5-segment icon indicates battery life 

Displays remaining battery life in hours and minutes 

Indicates transmitter is within range of a ShowLink access point 

enabling remote control of parameters 

Indicates the audio signal level 

Displayed when  buttons are locked 

Lock the buttons of the transmitter to prevent accidental or unauthor-

ized parameter changes.
Press and hold the ▼ and ▲ buttons for 3 seconds. Repeat to unlock. 

The transmitter can be powered on in RF mute mode to prevent trans-

mission of the audio signal. 
Press and hold the ▼ button during power until the RF Muted message 

is displayed. 

Draft 

6/7/11