ICOM 316101 User Manual
-8-
2-4 Hardware Installation
Take the following steps to set up your RADIO.
Connect the Ethernet Cable
The Wireless LAN RADIO supports 10/100M Ethernet connection. Connect the CAT5
cable from the RADIO to the RJ-45 connector of PoE (marked “To RADIO”) for RADIO
connection. Then connect the other end of the POE with straight RJ-45 cable to a hub or a
switch. Please note that, use the cross-over cable when you desire to connect the PoE
of RADIO to a PC.
cable from the RADIO to the RJ-45 connector of PoE (marked “To RADIO”) for RADIO
connection. Then connect the other end of the POE with straight RJ-45 cable to a hub or a
switch. Please note that, use the cross-over cable when you desire to connect the PoE
of RADIO to a PC.
Connect the Antenna
In RADIO connection, you can connect antenna to the N-type connector of RADIO.
Connect the Power Cable
Connect adapter to the PoE, and plug the other end of the adapter into an electrical outlet.
NOTE:
Only use the power adapter supplied with the PoE of RADIO. Otherwise, the
product may be damaged.