APC AP9618U User Manual
How to Upgrade a Network Management Card
3
How to Upgrade a Network Management Card: How to install the card
The faceplate labeling uses the following abbreviations:
•
•
Output: Output relay
–
NO: Normally open
–
COM: Common
–
NC: Normally closed
•
Pwr: Power
–
+12V: 12 VDC provided by the integrated
Environmental Monitor to sensors that require
power
Environmental Monitor to sensors that require
power
–
GND NO: Normally open ground
• Input: Contact
Zone 1 and Zone 2
–
NC: Normally closed
–
COM: Common
8. Plug the back of the 9-pin terminal connector through the
rectangular opening on the front of the assembled card.
How to install
the card
the card
See the
Installation and Quick-Start Manual provided with
your Management Card in printed form and on the
Management Card CD to install the Management Card in your
UPS, Expansion Chassis, or Triple Expansion Chassis. (Not all
APC devices support the use of an Expansion Chassis or Triple
Expansion Chassis.)
Management Card CD to install the Management Card in your
UPS, Expansion Chassis, or Triple Expansion Chassis. (Not all
APC devices support the use of an Expansion Chassis or Triple
Expansion Chassis.)
How to upgrade
the card’s
firmware
the card’s
firmware
You can obtain the latest firmware for the Network
Management Card from the APC Web site (
Management Card from the APC Web site (
www.apc.com).
See the Network Management Card
Addendum provided with
your Management Card in printed form and on the
Management Card CD to download firmware.
Management Card CD to download firmware.