Silex SX-550-0700 E1038 User Manual
Product codes
E1038
3. If you are installing an SX-550 WLAN model, connect the magnetic antenna base cable to the
antenna cable.
4. If you are installing an SX-550 WLAN model, connect the antenna to the base.
5. Connect one serial null-modem cable from the Serial Port 2 DB-9 connector on the Evaluation
Daughtercard to a serial port on a personal computer or laptop. The PC or laptop acts as a console
port for command line configuration and monitoring.
port for command line configuration and monitoring.
6. If an Ethernet LAN connection is required, plug a category 5 Ethernet cable into the RJ-45 jack.
The Ethernet interface has Auto-MDIX that automatically detects and configures itself for either a
straight-thru or crossover Ethernet cable.
straight-thru or crossover Ethernet cable.
Monitoring Module Status
You can monitor the module status using the yellow, green and orange LED status indicators on the
monitor. Table 2 defines the default functions of the LED status indicators.
monitor. Table 2 defines the default functions of the LED status indicators.
Table 2 Status Monitors
Function
State
Status
Power
Orange
On
The module is receiving power
Off
The module is not receiving power
Blinking
The module power supply is malfunctioning
Network Status
Yellow or Green
Yellow Off
Green Off
No network activity
Yellow On
Green Off
10base-T network active
Yellow Blinking
Green Off
10base-T network data received
Yellow Off
Green On
100base-TX network active
Yellow Off
Green Blinking
100base-TX network data received
Yellow On
Green On
Wireless network active, if WLAN model
Yellow Blinking
Green Blinking
Wireless network data received, if WLAN model
Part Number 40183-101
Silex SX-550 Developer's Guide
Page 8