Silex SX-550-0700 E1038 User Manual
Product codes
E1038
Using the ExtendView Utility to Configure the SX-550 (Ethernet
Connection)
The ExtendView Utilty is the easiest way to initially configure the SX-550 from a Windows PC because it
allows you to directly set the IP address into an unconfigured SX-550, and it allows you to view the IP
addresses of all of the SX-550s on your network. It has limited capabilities for configuring 802.1X
authentication, but it can be used in conjunction with either the internal web pages or the internal
command console for complete configuration capabilities.
allows you to directly set the IP address into an unconfigured SX-550, and it allows you to view the IP
addresses of all of the SX-550s on your network. It has limited capabilities for configuring 802.1X
authentication, but it can be used in conjunction with either the internal web pages or the internal
command console for complete configuration capabilities.
ExtendView is a component of the CD-ROM that is included with the Evaluation Daughtercard, or it can
be downloaded from the Silex website. To install ExtendView, simply follow the on-screen installation
instructions. The SX-550 configuration procedure is as follows (please note that the screens may be
slightly different than shown, depending on the SX-550 model and the firmware and software revision
levels).
be downloaded from the Silex website. To install ExtendView, simply follow the on-screen installation
instructions. The SX-550 configuration procedure is as follows (please note that the screens may be
slightly different than shown, depending on the SX-550 model and the firmware and software revision
levels).
1. Start the ExtendView Utility by clicking on
Start, Programs, silex technology,
ExtendView, and then ExtendView.
ExtendView, and then ExtendView.
2. When the Welcome screen appears, click on
Next, choose any name for your View Name,
select Automatically create a view with
default settings (or configure the view to
your preferences), and then click Finish.
select Automatically create a view with
default settings (or configure the view to
your preferences), and then click Finish.
Part Number 40183-101
Silex SX-550 Developer's Guide
Page 21
NOTE: Skip this section if you do not have a Windows PC or if you do not have an Ethernet connection to the SX-550.