AMX AVB-RX-DXLINK-HDMI FG1010-500 Data Sheet
Product codes
FG1010-500
© 2012 AMX. All rights reserved.
DATA SHEET
DXLink
TM
HDMI Receiver Module
AVB-RX-DXLINK-HDMI (FG1010-500)
Overview
The DXLink HDMI Receiver features built-in SmartScale® Technology to deliver
HDMI with HDCP that is perfectly scaled for each connected display automatically,
eliminating the integration challenges that can occur when sources and displays
have different optimal resolutions. It accepts audio, video, control and Ethernet
over one standard twisted pair cable up to 100 meters away from a compatible
Enova DVX All-In-One Presentation Switcher or DXLink Transmitter Module; it
accepts all this plus power over the same twisted pair cable when used in
conjunction with the Enova DGX 16/32 Digital Media Switchers, Enova DVX-2150HD
or DVX-2155HD. Mount the low-profile DXLink Receiver behind a display or above
a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus
monitor the connected display's settings, and send IR control signals back to the
head end using the same twisted pair cable.
The DXLink HDMI Receiver features built-in SmartScale® Technology to deliver
HDMI with HDCP that is perfectly scaled for each connected display automatically,
eliminating the integration challenges that can occur when sources and displays
have different optimal resolutions. It accepts audio, video, control and Ethernet
over one standard twisted pair cable up to 100 meters away from a compatible
Enova DVX All-In-One Presentation Switcher or DXLink Transmitter Module; it
accepts all this plus power over the same twisted pair cable when used in
conjunction with the Enova DGX 16/32 Digital Media Switchers, Enova DVX-2150HD
or DVX-2155HD. Mount the low-profile DXLink Receiver behind a display or above
a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus
monitor the connected display's settings, and send IR control signals back to the
head end using the same twisted pair cable.
Common Applications
The DXLink HDMI Receiver Module receives HDMI and control signals from a remote DXLink Transmitter, Enova
DGX or compatible Enova DVX. The receivers built-in control ports can be used to control a destination device and
the ICS Lan port provides IP an access point with used in conjunction with the Enova DGX or compatible Enova
DVX.
Features
Only One Cable – Receive audio and video while passing control Ethernet and power over one twisted pair
cable
cable
SmartScale Technology – Automatically responds to the display's declared EDID information and scales the
video to the best resolution and video parameters for that display without manual setup; this prevents
inferior video quality when sources are forced to lower resolutions to support the least capable display in the
system
video to the best resolution and video parameters for that display without manual setup; this prevents
inferior video quality when sources are forced to lower resolutions to support the least capable display in the
system
Native NetLinx® Control Everywhere - Control connected destination devices using the built-in IR and RS-232
ports
ports
Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair
cable, s
cable, s
white paper for more details
HDCP Compliant