Silex SX-SDPAG-2831-SP E1203 Leaflet
Product codes
E1203
SXSDPAG_EN_201003
silex technology is a registered trademark of silex technology, Inc. Other product or brand names may be registered trademarks or trademarks of their respective owners.
Technical information and specifications are subject to change wihout notice. ©2010 silex technology europe GmbH Alle Rechte vorbehalten.
Global Sales & Support Locations
USA (toll free) 866-765-8761
Europe Office
US Office
Germany (toll free) 0800-7453938
Headquarters Japan
+49 2151 650090
China Office
802.11a/b/g SDIO Surface Mount Module
SX-SDPAG
Diagrams
The silex SX-SDPAG 802.11a/b/g wireless module is designed for
OEMs who need a highly compact wireless radio/baseband solution
with very low power consumption. This surface mount module
contains all major components necessary to implement 802.11a/b/g
wireless connectivity, including a radio, baseband processor, power
amplifier, low pass filter, bandpass filter, crystal, and EEPROM.
SX-SDPAG's diversity antenna option gives you better and wider
wireless coverage.
OEMs who need a highly compact wireless radio/baseband solution
with very low power consumption. This surface mount module
contains all major components necessary to implement 802.11a/b/g
wireless connectivity, including a radio, baseband processor, power
amplifier, low pass filter, bandpass filter, crystal, and EEPROM.
SX-SDPAG's diversity antenna option gives you better and wider
wireless coverage.
SX-SDPAG is ideal for low power / battery operated devices like porta-
ble medical devices, RFID readers, mobile printers, and many more.
ble medical devices, RFID readers, mobile printers, and many more.
The SX-SDPAG is designed to be directly mounted to an OEM's PCB to
minimize size and cost. It features an industry-standard SDIO
interface, and is pre-tuned for ease of design and manufacturing. In
order to expedite your product development process, silex can also
provide both hardware and software engineering services, as well as
turnkey product design and manufacturing.
minimize size and cost. It features an industry-standard SDIO
interface, and is pre-tuned for ease of design and manufacturing. In
order to expedite your product development process, silex can also
provide both hardware and software engineering services, as well as
turnkey product design and manufacturing.
m
m
5
1
15 mm
15 mm
2.55 mm
Symme-
trierglied
LC-
Schaltung
LC-
Schaltung
Symmetri-
erglied
SX-SDPAG
Key Features
Chipset
Electrical Interface
Operating Voltage
Baseband Specifications
Temperature
Product Name
SDIO V1.1 (4-bit, 1-bit)
Specifications
Atheros Communications AR6002
3.30 VDC +/- 5%
CSMA/CA media access; DSSS, OFDM
Radio Transmit Power
(Typical)
18 dBm (802.11b/g); 16dBm (802.11a)
* Performance may vary across the temperature range and frequency depending on the implementation
Radio Specifications
2.4-2.4897GHz (FCC, ETSI, TELEC)
5.15-5.85GHz (FCC, ETSI, TELEC)
5.15-5.85GHz (FCC, ETSI, TELEC)
Packaging
56-pin (15 x 15 x 2.55mm)
•
Highly Integrated System for 802.11a/b/g WLAN
•
Integrated Atheros AR6002 Single Chip design
•
Very low power consumption (20mW standby; 924mW
transmit/299mW receive@5GHz typical; 904mW transmit/
365mW
receive@2.4GHz
typical)
•
Advanced power management to minimize standby and
active
power
•
Bluetooth coexistence handshaking
•
Built-In EEPROM for storage of MAC address and other
parameters
•
WEP 64/128, WPA (TKIP), WPA2 security
•
Driver development/porting and hardware design services
are available from silex. Please consult with our sales
representative for further information.
representative for further information.
-20 to +70 degrees C*
Ultracompact Wireless Solution for Embedded Applications