Asrock K7Upgrade-880 K7UPGR-800 User Manual

7

77

77

: 1 PS/2 mouse port, 1 PS/2 keyboard port,

1 serial port: COM1,

1 parallel port: ECP/EPP support,

6 ready-to-use USB 2.0 ports,

1 RJ-45 port,

Audio Jack: Line In / Line Out / Microphone

AMI BIOS

Supports “Plug and Play”

ACPI 1.1 compliance wake up events

SMBIOS 2.3.1 support

CPU frequency stepless control

(only for advanced users’ reference, see CAUTION 5)

Microsoft

®

 Windows

®

 98SE / ME / 2000 / XP compliant

1.

This motherboard supports Dual Channel Memory Technology. Before you

implement Dual Channel Memory Technology, make sure to read the

installation guide of memory modules on page 12 for proper installation.

2.

While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC system.

3.

Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!

It may cause permanent damage!

4.

Power Management for USB 2.0 works fine under Microsoft

®

 Windows

® 

XP

SP1 / 2000 SP4. It may not work properly under Microsoft

®

 Windows

® 

98 /

ME.

5.

Although this motherboard offers stepless control, it is not recommended

to perform over clocking.  Frequencies other than the recommended CPU

bus frequencies may cause the instability of the system or damage the

CPU. The CPU host frequency of this motherboard is determined by the

jumper-setting. To perform over-clocking, you must set the FSB jumper

according to your AMD CPU before you use the “Manual” option as the

FSB setting in BIOS setup. Please check page 26 for details.