Rose CrystalView DVI Fiber CRK-2DFMUD1D Leaflet
Product codes
CRK-2DFMUD1D
Phone: 281-933-7673
E-mail: sales@rose.com
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: +49 (0
)
2454 969442 Rose Electronics – Asia: +65 6324 2322
DS-CRVDF-2.7 Copyright 2006 -2007 Rose Electronics. All rights reserved
W W W . R O S E . C O M
Typical Application
Dual DVI Video model Application
Digitally access a computer from two locations,
locally and remotely
Specifications
Dimensions
4.1W x 5.6D x 1.7H (in)
103W x 143D x 42H (mm)
Weight
1.20 lbs / 0.6 kg (each)
Operating Temp 5˚C – 45˚C / 41˚F – 113˚F
Storage Temp
Storage Temp
-25˚C – 60˚C / -13˚F – 140˚F
Humidity
80% max, non-condensing
Resolution
1920 x 1200 @60Hz over all allowed
distances all lower resolutions with
refresh rates of at least 75Hz
Connectors
Video – DVI – I
Keyboard – MiniDIN6 / USB Type A
Mouse – MiniDIN6 / USB Type A
Fiber – LC fiber
Power
90-240 VAC to 5.0 VDC / app. 10W
Power
Local unit: 750 ma max
Requirements
Remote Unit: 750 ma max
Max distance
650ft (200m) 62,5µm Multimode
1300ft (400m) 50.0µm Multimode
33,000ft (10km) 9.0µm Singlemode
Indicators (LEDs) Front panel – power
Video check LED
RJ45 LEDs – Data error / status
Approvals
CE
Serial Data:
Baud Rate up to 19,200
Data Flow - Format independent
Flow control - RTS, CTS, DTR, DSR
Audio Data:
Signal level 5V p-p
Impedance 47KΩ
Connectors 3.5mm stereo jack
Transmission 16 bit, 38.4KHz Digitized
audio
Microphone - Powered or un-powered
Speakers - Powered
CrystalView DVI Fiber
(PS/2 model)
CrystalView DVI Fiber
(USB model)
CrystalView DVI Fiber basics
The CrystalView DVI
Fiber system consists of a transmitter that connects to a
PC, or server and a receiver that connects to a keyboard,
monitor, and mouse or a KVM switch. The transmitter
and receiver units are connected together with up to 6
miles of standard fiber cable.
PC, or server and a receiver that connects to a keyboard,
monitor, and mouse or a KVM switch. The transmitter
and receiver units are connected together with up to 6
miles of standard fiber cable.
Models
The CrystalView DVI Fiber is available in a PS/2
or USB model. All models allow for a second KVM
station next to the PCs, providing operation from the
transmitter or the receiver unit. There is also a dual video
model for systems that need to digitally transmit a
second video source.
transmitter or the receiver unit. There is also a dual video
model for systems that need to digitally transmit a
second video source.
Installation
Installing the CrystalView DVI Fiber units is
as easy as connecting the KVM station to the receiver,
connecting the CPU to the transmitter, and connecting
the transmitter to the receiver with fiber cable.
connecting the CPU to the transmitter, and connecting
the transmitter to the receiver with fiber cable.
Keyboard and Mouse emulation
The CrystalView
DVI Fiber uses a microprocessor to emulate the keyboard
and mouse. Only the transmitter unit has to be
connected for the PC to boot properly.
and mouse. Only the transmitter unit has to be
connected for the PC to boot properly.
Part Numbers – Multi-Mode Fiber Extender kits
CRK-2DFMPD1D
PS/2 model
CRK-2DFMUD1D USB model
CRK-2DFMPD2D
CRK-2DFMPD2D
PS/2 Dual Video
CRK-2DFMUD2D USB Dual Video
Part Numbers–Single-Mode Fiber Extender kits
CRK-2DFSPD1D
PS/2 model
CRK-2DFSUD1D
USB model
CRK-2DFSPD2D
PS/2 Dual Video
CRK-2DFSUD2D
USB Dual Video
kits include transmitter and receiver units
/AUD part number suffix = serial and audio option
/AUD part number suffix = serial and audio option
Receiver
Transmitter