Funkwerk CAB-RTNC / N-0.5M 600507 User Manual
Product codes
600507
7
Cables – RSMA-RTNC:
In the product portfolio of Funkwerk Enterprise Communications you will find two kinds of connectors at the devices. One type is
RSMA, and the other is RTNC. RSMA is used mainly in smaller devices because of it’s smaller size. RTNC is used in most industrial
products and Wx000.
RSMA, and the other is RTNC. RSMA is used mainly in smaller devices because of it’s smaller size. RTNC is used in most industrial
products and Wx000.
Examples of products with RSMA connector:
If a special antenna needs to be connected to this devices, an adapter must be used. Actually there are three kinds of adapters
defined. All three have RSMA plug and RTNC jack. This makes it possible to use any antenna (also the outdoor antennas) with
devices equipped with RSMA jack.
defined. All three have RSMA plug and RTNC jack. This makes it possible to use any antenna (also the outdoor antennas) with
devices equipped with RSMA jack.
RSMA jack – plug
RTNC jack (normal or bulkhead)
The three kinds of adapters are:
Art. No: 600505, CAB-RSMA-RTNC-0,2m
20cm jumper cable, which can be used to simply adapt from RTNC to RSMA
Cable Loss: 0,4dB@2,4GHz, 0,7dB@5,5GHz
20cm jumper cable, which can be used to simply adapt from RTNC to RSMA
Cable Loss: 0,4dB@2,4GHz, 0,7dB@5,5GHz
Art. No: 600503, CAB-RSMA-RTNC-1m
1m Bulkhead extender with high quality, high flexible low loss cable, which can be used to connect through an enclosure like e.g. a
cabinet. The RTNC jack can be fixed with a nut.
Cable loss: 0,5dB@2,4GHz, 0,9dB@5,5GHz
1m Bulkhead extender with high quality, high flexible low loss cable, which can be used to connect through an enclosure like e.g. a
cabinet. The RTNC jack can be fixed with a nut.
Cable loss: 0,5dB@2,4GHz, 0,9dB@5,5GHz
Art. No: 600504, CAB-RSMA-RTNC-3m
Same as above, but 3m instead of 1m.
Cable loss: 1dB@2,4GHz, 1,8dB@5,5GHz
Same as above, but 3m instead of 1m.
Cable loss: 1dB@2,4GHz, 1,8dB@5,5GHz