Fujitsu 300GB 2.5" 10K SAS 6Gb/s 8MB S26361-F4482-E130 User Manual

Product codes

S26361-F4482-E130

System configurator and order-information guide

Start PRIMERGY TX120 S3

PRIMERGY TX120 S3 Status 2012-06-29

Section

Basic unit

System unit Floorstand including:

* Two lockable front covers

Door #1 for accessible drive bays

Door #2 for hot plug HDD bays (Type 1 base unit only)

Both doors may be locked or door #1 may be left open while door #2 is still locked

* HD type depending on base unit:

Type 1: 4x hot plug SFF (2.5") SAS or SATA HDD (SFF base units only)

Type 2: 2x non hot plug LFF (3.5") SATA HDD (LFF base units only)

* 1 power supply (Standard PSU with 250W) with 0-Watt Option

* Two System fans ( No Hot-plug, No redundancy )

* 1 bay 5.25" for accessible drives (slim line)

* 1 bay 3.5" (HH) for accessible drives (DDS or RDX)

Systemboard D3049 with:

* heat pipe for the CPU

* Chipset Intel® C202 (codenamed Bromolow Cougar Point Essential)

* 4 PCI slots:

1 x PCIe x16 Gen2 (lp)

1 x PCIe x4 (x8 connected) Gen2 (lp)

1 x PCIe x1 (x4 connected) Gen2 (lp)

1 x 32Bit / PCI 33MHz-5V, (lp)

* 4 memory slots for max. 32GB with 4x 8GB unbuffered DDR3 RAM

- Memory is divided into 4 DIMMs ( 2 channels with 2 slots per channel )

- First Memory ( one module ) has to be selected for an orderable basic unit

- Memory upgrade is possible module wise

- SDDC (Chipkill) is not supported

* SATA-Controller on board (supporting RAID 0/1)
* 2x1 Gbit Ethernet LAN on board ( Intel Hartwell and Intel Lewisville ) with

ToE;

and iSCSI boot integrated in System BIOS as selectable option

* iRMC S3 (integrated Remote Management Controller) on-board server management controller

with dedicated 10/100/1000 Service LAN-port and

integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp)

Interfaces:

* 1x RS-232-C (9-pin) (usable for BMC or OS or shared)

* 1x VGA (15 pin)

* 10x USB 2.0 ( UHCI ) with 480MBit/s (6x external at the rear, 2x external at the frontside,

2x internal USB Interfaces for backup devices, uSSD and internal memory stick, no USB wakeup)

* 3x LAN RJ45 including 1x maintanence-LAN RJ45 switchable (iRMC)

*internal Cables:

1. SATA cable for BD/DVD.

2. HDD Backplane cable (Type 1 base unit only) or SATA cable for up to 2 HDDs (Type 2 base unit only)

* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

* Documentation engl. (multilingual on CD)

Fujitsu Technology Solutions x86 PRIMERGY Server

5 of 14