Transition Networks J/VD-TX-01(SC) J/VD-TX-01(SC)-NA Leaflet

Connect Uni-directional Analog Video Devices Over Fiber

Specifications

Video Formats 

 

NTSC, PAL, SECAM

Optical Specs 

 

  850nm 

 

3.0 dB Link Budget 

 

1310nm 

 

3.0 dB Link Budget

LEDs  

 

 

PWR(Power): ON = Power connected 

 

RX: ON = Copper Video feed IN 

 

J/VD-RX-01(xx) Receiver:

 

 

PWR(Power): ON = Power connected 

 

RX: ON = Fiber Video feed IN

Dimensions  

 

 

Width: 2.0” [51 mm] 

 

Depth: 2.2” [56 mm] 

 

Height: 1.0” [25 mm] 

 

 

 

Width: 4.0” [102 mm] 

 

Depth: 3.0” [76 mm] 

 

Height: 1.0” [25 mm]

Power Supply 

 

Transmitter:  9 – 40 VDC, 9 – 24 VAC 

 

Receiver: 9 – 16 VAC/DC

Power Consumption 

 

2 Watts

Operating Temperature (Standard) 

0°C to 50°C (32°F to 122°F) 

Storage Temperature 

 

-25 to 85°C (-13°F to 185°F)

Altitude 

 

0 – 10,000 ft.

Operating Humidity 

 

5% – 95% non-condensing

Shipping Weight 

 

1 lb. [0.45 kg]

Safety Compliance 

 

CE Mark 

 

Power Supply: UL listed, EN60950

Regulatory Compliance for Emissions 

FCC Class A, EN55022 Class A

Regulatory Compliance for Immunity 

EN55024

Warranty 

 Lifetime

Transition Networks’ analog composite 

video media transmitter, J/VD-TX-01, 

converts a CCTV signal from cameras to 

a single strand of multimode or single 

mode fiber for up to 10 km. Transition 

Networks’ analog video media receiver,  

J/VD-RX-01, converts the optical signal 

back to an analog composite video sig-

nal. All conversions are performed in real 

time. Automatic gain control installed on 

both Transmitter and Receiver main-

tains desired quality of video’s contrast 

and brightness for extended distances. 

No field adjustments are necessary. 

Wide input range power supply allows 

for multiple choices of power source in-

cluding camera power supply.
To assure best quality, Transition Net-

works’ Transmitters & Receivers should 

be used on both ends of the link.

Features

4

AM Modulation

4

NTSC, PAL, SECAM compatibility

4

Compatible with all video CCTV  

    equipment

4

Real Time Full Color Video

4

Automatic Gain Control on Transmitter

4

Automatic Gain Control on Receiver

4

Link Pass Through 

4

Wide input power supply:

•  Transmitter: 9 – 24 VAC w/Iso-

lated Power Supply; 9 – 40 VDC

•  Receiver: 9 – 16 VAC/DC

4

Video Specification:

•  Input Video: .5 to 2-volt pk-pk  

(75 ohms)

•  Bandwidth: 5 Hz – 10 MHz

•  Differential Gain: < 5 %

•  Differential Phase: < 5°

•  Tilt: < 1%

•  Signal/Noise Ratio: 60 dB

see also:

 Analog CCTV Video Point System™ Slide-In-Module Media Converters 

Ordering Information

  BNC (75 ohm)

to  Multimode (ST)  

  BNC (75 ohm)

to  Multimode (ST)  

  BNC (75 ohm)

to  Multimode (SC) 

  BNC (75 ohm)

to  Multimode (SC)  

  BNC (75 ohm)

to  Single Mode (ST)

  BNC (75 ohm)

to  Single Mode (ST)

Optional Accessories (sold separately)

     Wall Mount Bracket Kit (for transmitter)

     12-slot Media Converter Rack  

(for receivers)

     Wall Mount Bracket Kit (for receivers)