Philips 3000 series LCD TV 50PFL3807 50PFL3807/F7 User Manual

English

41

This menu is displayed only when you set Wireless in 

Network selection. In order to use a wireless network, you must set up 

a connection to the AP (e.g. wireless router).

3

Use ▲▼ to select Wireless network setting, then press OK.

Auto

Search for wireless networks automatically and select the SSID from the 

list. 

4

Use ▲▼ to select Auto, then press OK.

5

The list of wireless networks will be displayed. 

 

 Use ▲▼ to select the appropriate the SSID, then press OK.

Auto

Router 1

 

Enter Key

Manually enter your S

Router 2

 

Select

Router 3

 

Enter Key

Router 4

 

Select

•  If you select the SSID with  , WEP*

2

 / WPA / WPA2 Key entry 

screen will appear.

 

   Enter the WEP*

2

 / WPA / WPA2 key of the selected wireless 

network using ▲▼◄►, then press OK.

•  If you select the SSID has a WPS, the WPS setting screen will 

appear. 

 

  Use ▲▼◄► to select a setting, then press OK.

Easy connect

Select this setting if your router has a WPS 

button. Start scanning for wireless networks on 

the TV after pressing the WPS button on your 

router. If connection test fails, try Easy connect 

again.*

1

If it fails then refer to the router’s manual for 

more details.

WPS code

Select this setting if your router has a WPS but 

does not have a WPS button. Enter the 8-digit 

WPS PIN code shown on your TV in the router 

settings menu via PC before Connect is selected.

Manual

If your wireless network with authentication 

setting (WEP*

2

, WPA-PSK or WPA2-PSK), 

WEP*

2

 / WPA / WPA2 Key entry screen will 

appear. Enter the WEP*

2

 / WPA / WPA2 key of 

the selected wireless network using ▲▼◄►, 

then press OK.

*1  WPS (Easy Connect) cannot be used when the security protocol is set to 

WEP. Change the Access Point’s security mode from WEP to WPA or WPA2 

(recommended).

*

2  WEP is not recommended to be used due to its Major security flaws. 

Change the Security protocol on the wireless router to WPA or WPA2 

(recommended) mode.

Confirmation message will appear. Select OK to complete the settings.

Note

 

• For a wireless network with authentication setting, key icon appears to the right hand 

of the SSID.

 

• Signal icon shows the strength of the signal.

 

• WEP / WPA key appears as asterisks on the confirmation screen.

 

• The wireless LAN supports following specifications.

 

– Wireless standards 

: IEEE 802.11 b/g/n

 

– Frequency spectrum 

: 2.4GHz

 

– Security protocol 

: WEP*

2

 / WPA / WPA2

Manually enter your SSID

Set up the connection to the AP (e.g. wireless router) manually by 

entering the SSID.

4

Use ▲▼ to select Manually enter your SSID, then press OK.
•  AP (e.g. wireless router) SSID entry screen will appear. 

 

   Enter the SSID using ▲▼◄►, then press OK.

5

Use ▲▼ to select the authentication setting of the selected 

wireless network.
•  For a wireless network with authentication setting, select the 

authentication setting, according to the security type of the 

wireless network.

Select security type for

"Router 1"

None

WEP

WPA-PSK

WPA2-PSK

Back

None

Set the authentication setting to None.

WEP*

2

Set the authentication setting to WEP.*

2

WPA-PSK

Set the authentication setting to WPA-PSK.

WPA2-PSK

Set the authentication setting to WPA2-PSK.

•  For a wireless network without authentication setting, select 

None.

•  If you select WEP*

2

, WPA-PSK or WPA2-PSK, WEP / 

WPA / WPA2 Key entry screen will appear. 

 

   Enter the WEP*

2

 / WPA / WPA2 key of the selected wireless 

network using ▲▼◄►, then press OK.

•  Confirmation message will appear. Select Yes to complete the 

settings.

*

2  WEP is not recommended to be used due to its Major security flaws. 

Change the Security protocol on the wireless router to WPA or WPA2 

(recommended) mode.