Epson 9600 User Manual

5. Press 

Enter

. You see 

SELECT INK SET

. 

6. Press 

u

 or 

d

 to select the correct option for the ink mode you want to 

switch to:

7. Press 

ENTER

. 

If you see the message 

NOT ENOUGH INK

, lift the ink lever and 

remove any low or empty cartridges. (Check the 

Ink Out

 lights on the 

control panel to see which cartridges are low or empty.) Insert the 
replacement cartridge(s), then lower the ink lever. 

8. The printer displays a message telling you to release the ink lever and 

remove the cartridges. Raise the lever and remove all the cartridges; do 
not re-insert them until instructed to do so.

 

Be sure to set aside any black ink cartridges you won’t be using, so that 
you don’t accidentally re-insert them. 

Matte Black Mode

#1 MAT: #2 LBK

Dual Matte Black Mode

#1 MAT: #2 MAT

Photo Black Mode

#1 PBK: #2 LBK

The display indicates 
which cartridges will be 
installed in the first and 
second ink slots (Matte 
Black, Light Black, or 
Photo Black). You may 
not need to replace both 
cartridges, depending on 
the mode you want to 
switch to.

Do not turn off the printer 
once the cartridges are 
removed. 

If a power failure occurs, 
turn the printer back on. 
You can resume the 
procedure at the point 
where it was interrupted.