Philips RI9828/47 User Manual

PROGRAMMING THE MACHINE

MACHINE SETTINGS

Activate/deactivate the warning to replace the water

fi lter.

Activate/deactivate the rinse function to briefl y clean the

internal circuits of the machine.

This function is activated by default by the manufacturer.

Note: the rinse cycle is performed every time the

machine is started up, after the warming phase.

This function allows you to set various water settings.

Adjust the machine's water hardness setting. This will

allow the machine to request descaling at the right time.

Measure the water hardness as shown on page 6.

water

settings

rinse

water fi lter

off

water

hardness

3/4

Important note.

This setting automatically adjusts the parameters which allow the

user to perform correct machine maintenance.

Select “on”: only when the water fi lter is installed in the water tank as

shown on page 7.

This function is automatically activated after selecting “reload water fi lter”.

Select “off”: when there is no water fi lter in the water tank.

Select “reload water fi lter” : when a new water fi lter is installed in the

water tank.

NOTE: if the water fi lter is not available, insert the small white fi lter

previously removed (see step 1 - page 7) into the tank.