Brodit 535392 Leaflet
23 July, 2012, www.brodit.com, © 2012 Brodit AB
Product 535392
535392 Holder with lock. Active holder with cig-plug and tilt swivel. 2 keys included.
This holder is to be used when you want to have your Galaxy Tab extra securely in place and still have it easy
accessable. The holder is crashtested and approved for use on Brodit's headrest mount. The holder is equipped
with a cig-plug for connection to the vehicle's 12 Volt socket so you will always have a freshly charged battery!
The holder is made of extra strong plastic and is equipped with a lock device. The holder is mounted onto a tilt
swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily
switch between portrait and landscape mode by turning the holder into desired position.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls.
ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and
GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm
fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard,
each combination of tablet-car must be examined in detail by you in order to determine if such an installation is
possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place,
as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit
recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
accessable. The holder is crashtested and approved for use on Brodit's headrest mount. The holder is equipped
with a cig-plug for connection to the vehicle's 12 Volt socket so you will always have a freshly charged battery!
The holder is made of extra strong plastic and is equipped with a lock device. The holder is mounted onto a tilt
swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily
switch between portrait and landscape mode by turning the holder into desired position.
Tablets (Surfpads) should not be installed onto a car’s dashboard if they block the view or block key controls.
ProClip (Brodit’s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and
GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm
fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car’s dashboard,
each combination of tablet-car must be examined in detail by you in order to determine if such an installation is
possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place,
as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit
recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount.
EAN: 7320285353923
Item no 535392 fits:
Samsung Galaxy Tab 7,0 Plus GT-P6200 (For all countries)
Samsung Galaxy Tab 7,0 Plus GT-P6200 (For all countries)
1 (2)