Altronix HUBWAYEX1 Leaflet

Altronix HubWayEX1 Active UTP Transceiver Module
employs automatic gain control (AGC) to transmit UTP video
and RS422/RS485 data over a single CAT-5 or higher structured
cable. Unit provides a single camera channel in a compact insu-
lated housing. Video transmission range is up to one (1) mile
max.

• 16VAC-24VAC or 12VDC-24VDC, 1W.

These products shall only be powered by a UL Listed 
Class 2 power Supply or Class 2 transformer.

• One (1) channel of video over twisted pair up to

a distance of 5000 ft.

• Active balun combiners not required.
• One (1) 75 ohm video output.

• RS422/RS485 data input.

• Video signal LED indicator.

• Automatic picture and gain control.
• Automatic compensation for reverse polarity

wiring (video).

- HubWayEX1: 0.5 lbs.

Rev. DSHubWayEX1 - D20J

UL Listed for Commercial CCTV Equipment (UL 2044).

Video output

to head end

equipment

(DVR).

Spring terminal block

for RS422/RS485 input

from head end equipment

(DVR) for PTZ control.

CAT-5 or higher structured

cable to Video/Balun Combiner

at camera.

Video

UL Listed for Commercial CCTV Equipment
(UL 2044). CUL Listed - CSA Standard C22.2
No. 1-04, Audio, Video and Similar Equipment

AC/DC

Input

Video

Channel

Data

Single Channel Active UTP Transceiver Hub

Input

16-24VAC, 1W
12-24VDC, 1W

Class 2 wiring to be used.

www.altronix.com

UL Listed

Class 2

power Supply

or Class 2

transformer