Altronix HUBWAYEX16SP Leaflet

Altronix HubWayEX16SP Active UTP Transceiver
Hub w/Integral Isolated Camera Power employs
automatic gain control (AGC) to transmit UTP
video, RS422/RS485 data and power over a single
CAT-5 or higher structured cable. Units provide 16
camera channels in a space saving 1U EIA 19” rack mount chassis
which may be rack, wall or shelf mounted. Video transmission range is up to one (1) mile max. per channel.

• 115VAC 60Hz, 2.5 amp or 230VAC 50Hz, 1.5 amp.

• Sixteen (16) channels of video over twisted pair up to

a distance of 5000 ft. per channel.

• Sixteen (16) 75 ohm video outputs.
• Active balun combiners not required.

• RS422/RS485 data inputs.

• Unit provides up to 1 amp max. per channel.
• Individually selectable 24VAC or 28VAC isolated

power outputs with OFF position.

• Individual electronically isolated PTC outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.

• AC input power indicator.
• Video signal and power LED indicators.

• Automatic picture and gain control.
• Automatic compensation for reverse polarity wiring 

(video).

• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U rack mount chassis for use in standard

EIA 19” rack.

• Video Balun/Combiners:

- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.

• Optional HubSat4D/Di or HubWayEXP allows 

transmission of up to four (4) video signals over
a single CAT-5 or higher structured cable.

- HubWayEX16SP: 22.15 lbs.

Rev. DSHubWayEX16SP - D20J

UL Listed for Commercial CCTV Equipment (UL 2044).