Mercedes Benz 2009 M-Class User Manual

Page of 585
361
Operation
Engine compartment
Adding engine oil
Example ML 350 (ML 320 CDI similar)
1 Filler cap
Example ML 500 (ML 63 AMG similar)
1 Filler cap
Unscrew filler cap
1 from filler neck.
Add engine oil as required. Never over-
fill with oil.
Be careful not to spill any oil when adding. 
Avoid environmental damage caused by oil 
entering the ground or water.
Screw filler cap
1 back on filler neck.
For more information on engine oil, see 
“Technical data” section (
page 543) and 
(
page 546).
!
Only use approved engine oils and oil filters 
required for vehicles with Maintenance System 
(U.S. vehicles) or FSS PLUS (Canada vehicles). 
For a listing of approved engine oils and oil 
filters, refer to the Factory Approved Service 
Products pamphlet in your vehicle literature 
portfolio, or contact an authorized 
Mercedes-Benz Light Truck Center.
Using engine oils and oil filters of specification 
other than those expressly required for the 
Maintenance System (U.S. vehicles) or 
FSS PLUS (Canada vehicles), or changing of oil 
and oil filter at change intervals longer than 
those called for by the Maintenance System 
(U.S. vehicles) or FSS PLUS (Canada vehicles) 
will result in engine or emission control system 
damage not covered by the Mercedes-Benz 
Limited Warranty.
!
Excess oil must be siphoned or drained off. 
It could cause damage to the engine and/or 
catalytic converter (gasoline engine) or the oxi-
dation catalyst (diesel engine) not covered by 
the Mercedes-Benz Limited Warranty.