Saeco Super-automatic espresso machine HD8743/12 HD8743/12 User Manual
Product codes
HD8743/12
ENGLISH
29
DESCALING
The descaling process takes approx. 30 minutes.
Limescale builds up inside the machine during use. It needs to be removed
regularly as it may clog the water and coff ee circuit of your machine. The
machine indicates when descaling is needed. If the light is blinking very
quickly, you need to descale.
regularly as it may clog the water and coff ee circuit of your machine. The
machine indicates when descaling is needed. If the light is blinking very
quickly, you need to descale.
Caution:
Not doing this will ultimately make your machine stop working prop-
erly, and in this case repair is NOT covered by your warranty.
erly, and in this case repair is NOT covered by your warranty.
Use the Saeco decalcifi er only. Its formula has been designed to ensure
better machine performance. The Saeco decalcifi er (CA6700) may be pur-
chased at the Philips online shop at www.shop.philips.com/service, your
local dealer or at authorised service centres.
better machine performance. The Saeco decalcifi er (CA6700) may be pur-
chased at the Philips online shop at www.shop.philips.com/service, your
local dealer or at authorised service centres.
2
Remove the water tank and pour the entire content of the Saeco decal-
cifi er. Then fi ll the tank with fresh water up to the MAX level.
3
Place the water tank back into the machine.
Warning:
Never drink the decalcifi er or any products dispensed until the cycle
has been carried out to the end. Never use vinegar as a decalcifi er.
has been carried out to the end. Never use vinegar as a decalcifi er.
Note:
During the descaling cycle do not switch off the machine or turn it into the
stand-by mode. Once you start the descling cycle, you cannot exit until the
cycle fi nishes.
stand-by mode. Once you start the descling cycle, you cannot exit until the
cycle fi nishes.
To execute the descaling cycle please follow the steps described below:
1
Before descaling:
-
Empty the drip tray;
-
Remove the Pannarello (if supplied) from the hot water/steam
wand;
wand;
-
Remove the “Intenza+” water fi lter from the water tank if it was
installed.
installed.
MAX
MIN
Flashing very quickly