Supermicro AOC-STG-I2T Leaflet

Page of 1
AOC-STG-i2T
The Low Cost, Low Power 10Gb Ethernet Adapter for Advanced Datacenters  
The Supermicro AOC-STG-i2T is the lowest power and least cost 10GbE adapter solution in today’s data center marketplace.  
The auto-negotiation feature between 1GbE and 10GbE provided by the AOC-STG-i2T offers users the backwards compatibility 
they need for a smooth transition to 10GbE. It reliably addresses the demanding needs of bandwidth-intensive applications 
at a fraction of the cost of traditional 10GbE adapters by utilizing cost-effective RJ-45 connectors at a much longer cabling 
distance. The Supermicro AOC-STG-i2T 10GbE adapter is truly a best-in-class solution for advanced data centers. 
Key Features
Dual RJ45 Connectors
Low-Profile, Short Length Standard Form Factor
PCI Express 2.1 (2.5GT/s or 5GT/s)
Intel® QuickData Technology
VMDq, Next-Generation VMDq, and  
PC-SIG SR-IOV for Virtualized Environments
Jumbo Frames Support up to 15.5KB
Load Balancing on Multiple CPUs
iSCSI Remote Boot Support
Fibre Channel over Ethernet (FCoE)
Support the most popular Network  
Operating Systems (NOSs)
Support RJ-45 Category-6 or 6A
RoHS compliant 6/6
Specifications
•  General: 
-  Intel® X540 10GbE controller with integrated 10GBase-T copper PHYs 
-  Compact size low-profile standard form factor 
-  PCI-E x8 2.1 (2.5GT/s or 5GT/s) interface 
-  Dual RJ-45 connectors with speed up to 10Gb/port 
-  Load balancing on multiple CPUs 
-  Intel® PROSet Utility for Windows® Device Manager 
-  Maximum power consumption: about 13W
•  I/O Features: 
-  Intel® QuickData Technology: DMA engine that enhances data  
    acceleration and lowers CPU usage 
-  Support jumbo frames of up to 15.5KB 
-  802.1q VLAN support 
-  Two integrated independent 10GBase-T interfaces operate at  
    10GBase-T (10Gb/s) and 1000Base-T (1Gb/s) modes 
-  Direct Cache Access (DCA) to avoid cache misses 
-  MSI-X support to minimize interrupt overhead of and  
    allow load-balancing between multiple cores/CPUs 
-  Receive and Transmit Side Scaling for Windows environment  
    and Scalable I/O for Linux environments
•  Performance Features: 
-  TCP/UDP Segmentation Offload 
-  IPv6 Support for IP/TCP and IP/UDP Receive Checksum Offload 
-  Supports Fibre Channel over Ethernet (FCoE) 
-  Low latency interrupts  
-  DCA support
•  Virtualization Features: 
-  Support for Virtual Machine Device Queues (VMDq and  
    Next-generation VMDq) 
-  L2 Ethernet MAC address and VLAN filters 
-  PC-SIG SR-IOV implementation 
-  Advanced Packet Filtering 
-  VLAN support to allow creation of multiple VLAN segments
•  Manageability Features: 
-   Preboot eXecuation Environment (PXE) support 
-  Simple Network Management Protocol (SNMP) and  
    Remote Network Monitoring (RMON) statistics counters 
-  iSCSI remote boot
•  OS Support: 
-  Windows® Server 2008 R2 SP1, 7 SP1, Server 2008 SP2, Vista SP2,  
    Server 2003 R2, 2003 SP2, 2008 SP2 
-   Linix Kernel version 3.1.x & 2.6.X 
-  FreeBSD 8
•  Cables Support: 
-  RJ-45 Category-6 up to 55m; Category-6A up to 100m
•  Operating Conditions: 
-  Operating temperature: 0°C to 55°C
•  Physical Dimensions: 
-  Card PCB dimensions: 13.65cm (5.37in) x 6.35cm (2.50in) (LxW) 
-  Height of end brackets: standard -  12cm (4.725in), low-profile – 7.94cm 
(3.13in)
Compliance/Environmental 
•  RoHS Compliant 6/6, Pb Free                        
RoHS
c o m p l i a n t
 
                                                                                                             
Supported Platforms
•  Motherboards with minimum PCI-E x8 slot
•  Server Systems with low-profile or full-height PCI-E x8 expansion slot
Please note that this product is only available as integrated solution with Supermicro server systems
For the most current product information, visit: 
www.supermicro.com