Gamber-Johnson 7160-0364 Leaflet

Attaches to rectangular forklift 

support braces 1.5" to 2.5" wide

Yes - 0-90 Clevis up to 90° 

fore/30° aft

Yes - Clam Shell up to 160°

Motion Attachment - 360° 

Entire arm - 360° 

7.25 lbs.

8.1"

8.1"

9.5"

•  Heavy gauge steel construction for long-term durability in a rugged environment
•  Black powdercoat fi nish for maximum corrosion resistance
•  The entire arm can rotate around 360° and the Motion Attachment can also rotate 360°
•  Arm extends 3” bringing equipment closer to the user
•  Arm can be tighten down to be locked into a permanent position
• Tilt capabilities:

•  90° forward allows for tablets to be easily mounted
•  30° aft movement with a positive stop at 30°
•  Riveted design allows for smoother tilt movement

• Easier installation:
•  Open throat design for ease of mounting to docking stations and cradles 
•  Can be mounted directly to any 

Clam Shell (Item No. 7160-0357, 7160-0370, 7160-0371)

•  Heavy gauge steel construction for long-term durability in a rugged environment
•  Black powdercoat fi nish for maximum corrosion resistance

 features the following hole patterns:  AMPS, NEC and 75mm VESA 

• The 

 can be tilted up or down for a total of 160°

•  To tilt the 

 simply loosen the adjustable lever, tilt to desired position and then re-tighten the lever

•  A secondary bolt is included to lock the clam shell into a permanent position
•  Plate sandwiches the forklift support brace and allows user to position the device at the desired height position

D

W

H

3001 Borham Ave.  |  Stevens Point, WI  54481, USA

Phone: 715.344-3482  |  Toll-free: 800.487-9220  |  Fax: 715.344-5209

Email: gamberj@gamberjohnson.com | Website: www.gamberjohnson.com

This  document, including images, may not be reproduced partly or fully without the expressed written 
consent of Gamber-Johnson’s Marketing Department. © Copyright  2013 Gamber-Johnson LLC

FORKLIFT MOUNT:

FORKLIFT MOUNT:
0-90 CLEVIS WITH SMALL PLATE

0-90 CLEVIS WITH SMALL PLATE