Toshiba DKT2004-CT User Manual

Telephones can have many [DN] buttons, but the telephone must be the designated 
owner of a [DN] before you can Call Forward to the [DN]. Each telephone is usually 
the owner of at least one [DN] which is called the Primary Directory Number [PDN].

Your telephone can be programmed to have [PhDNs] in addition to [DNs]. Each 
[PhDN] can be set to any mode of Call Forward independent of other [DNs] on the 
telephone. Like the [DNs], your telephone must be the owner of [PhDNs], so that you 
can use any of call forward features. If you hear re-order tone when following any of 
the Call Forward steps, then your telephone is not the owner of the selected [PhDN].

When you forward calls to another destination, you see a message indicating the:

♦

Type of Call forward.

♦

Forwarded from [PhDN] and/or [DN].

♦

Forwarded to destination number.

Call Forward–All Calls, Call Forward–No Answer, and Call Forward–Busy 
can only be activated when Speed Dial is assigned to an “

)

-

)

” function 

key or deleted from all buttons (use 

). See 

“Access Codes” on Page 90

.

If your station is idle or busy and has this feature activated, all calls to it are forwarded 
immediately. The station does not ring.

➤

1. Press 

&DOO)UZG$OO

&DOOV

The Call Frwd All Calls LED flashes.

...or press a [PDN] or 
[PhDN] + 

.

You hear a confirmation tone.

[PhDNs] can only be forwarded by using 
the dial codes.

2. Enter the [DN] to which 

calls are forwarded.