TP-LINK AC750 User Manual

 

- 111 - 

Figure 4-105 PPPoEv6 



  PPP Username/Password - Enter the User Name and Password provided by your ISP. 

These fields are case-sensitive. 



  Authentication Type – Choose one authentication type from AUTO-AUTH, PAP, CHAP and 

MS-CHAP. 



  Addressing Type - There are two types of assignation for IPv6 address: SLAAC (Stateless 

address auto-configuration) and DHCPv6 (Dynamic Host Configuration Protocol for IPv6) 
Server. 



  MTU(Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet 

networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely 

required, and should not be done unless you are sure it is necessary for your ISP connection. 



  Enable MLD Proxy - Enable the Multicast Listener Discovery (MLD) Proxy function if you need. 



  Use IP address specified by ISP - Input a static IPv6 address from the ISP. 



  Set IPv6 DNS Server manually -  Enter the IP address of the IPv6 DNS server and 

secondary IPv6 DNS server.