TP-LINK AC750 User Manual

Page of 143
Archer C2
AC750 Wireless Dual Band Gigabit Router 
 
- 49 - 
 
Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of 
up to 32 characters. The same name must be assigned to all wireless devices in your 
network. Considering your wireless network security, the default SSID is set to be 
TP-LINK_5GHz_XXXXXX. This value is case-sensitive. For example, TEST  is NOT the 
same as test
 
Region - Select your region from the drop-down list. This field specifies the region where the 
wireless function of the router can be used. It may be illegal to use the wireless function of 
the router in a region other than one of those specified in this field. If your country or region 
is not listed, please contact your local government agency for assistance. 
When you select your local region from the drop-down list, click the Save button, then the 
Note Dialog appears. Click OK
 
Note Dialog   
 
Note:
 
Limited by local law regulations, version for North America does not have region selection 
option. 
 
Mode - Select the desired mode.   
  11an mixed - Select if you are using both 802.11a and 802.11n wireless clients. If you 
set the Mode 11an mixed, all of 802.11a and 802.11n wireless stations can connect to 
the router. 
  11a/n/ac mixed - Select if you are using a mix of 802.11a, 802.11n and 802.11ac 
wireless clients. It is strongly recommended you set the Mode 11a/n/ac mixed, all of 
802.11a, 802.11n and 802.11ac wireless stations can connect to the router. 
 
Channel - This field determines which operating frequency will be used. The default channel 
is set to Auto, so the router will choose the best channel automatically. It is not necessary to 
change the wireless channel unless you notice interference problems with another nearby 
access point. 
 
Enable SSID Broadcast - When wireless clients survey the local area for wireless networks 
to associate with, they will detect the SSID broadcast by the router. If you select the Enable 
SSID Broadcast checkbox, the Wireless router will broadcast its name (SSID) on the air.