TP-LINK TD-W8950ND User Manual

)

The Total Upstream Bandwidth and Total Downstream Bandwidth are required to be configured.   

Choose “Advanced Setup”Æ“Bandwidth Control”  Æ“Rule List” and then you will see the 
screen as shown in Figure 4-47. This page allows you to view and configure TC rules. 

 

Figure 4-47 

To add a TC rule, click the Add button and you can configure it in the screen as shown in Figure 
4-48. 

 

Figure 4-48 

¾

  Rule Status: Select the status of the rule from the drop-down list to enable or disable the rule. 

¾

  IP Range: Enter a single IP address or a range of IP addresses. 

¾

  Port Range: Enter a single port or a range of ports. 

¾

  Protocol: Select a protocol type from the drop-down list. TCP, UDP and ALL are available 

here. 

¾

  Priority: Select priority form the drop-down list. There are five options: Highest, 1, 2, 3, 4, 5, 6 

and Lowest. The default precedence of the rule is 4. 

¾

  Upstream: Enter the min and max upload speed through the WAN port.   

¾

  Downstream: Enter the min and max download speed through the WAN port.   

After completing the above configuration, click the Save/Apply button to make it take effect and 
then you will see the following list as shown in Figure 4-49. If you want to modify the rule, click the 

48