TP-LINK TL-SG5428 User Manual

 



 

If the switch is a commander switch in the cluster, please take the following steps. 

1 

Enable the NDP function 
globally and for the port, and 
then configure NDP 
parameters 

Optional. On Cluster→NDP→NDP Config page, enable 
the NDP function on the switch. 

2 

Enable the NTDP function 
globally and for the port, and 
then configure NTDP 
parameters 

Optional. On Cluster→NTDP→NTDP Config page, enable 
the NTDP function on the switch. 

3 

Establish a cluster and 
configure the related 
parameters 

Optional. On Cluster→Cluster→Cluster Config page, 
establish a cluster and configure the related parameters. 

4 

Manage the device in the 
cluster 

Optional. On Cluster→Cluster→Member Config page, 
select the desired member switches and click the Manage 
button to log on to its Web management page for 
configuration. 
Or 
On  Cluster→Cluster→Cluster Topology page, double- 
click the icon of the switch to view its detailed information; 
click the icon, and then click the Manage button to log on to 
its Web management page for configuration. 



 

If the switch is a member switch in the cluster, please take the following steps. 

1 

Enable the NDP function 
globally and for the port, and 
then configure NDP 
parameters 

Optional. On Cluster→NDP→NDP Config page, enable 
the NDP function on the switch. 

2 

Enable the NTDP function 
globally and for the port, and 
then configure NTDP 
parameters 

Optional. On Cluster→NTDP→NTDP Config page, enable 
the NTDP function on the switch. 

3 Manually 

collect 

NTDP 

information 

Optional. On Cluster→NTDP→Device Table page, click 
the  Collect Topology button to manually collect NTDP 
information. 
Or 
On  Cluster→Cluster→Cluster Topology page, click the 
Collect Topology button to manually collect NTDP 
information. 

4 View the detailed 

information of other 
switches in the cluster. 

Optional. On Cluster→Cluster→Cluster Topology page, 
double-click the icon of the switch to view its detailed 
information. 

214