TP-LINK TL-SG3216 User Manual

 

188

 

index  ——  The index number of the event entry, ranging from 1 to 12. You can 

only select one entry for each command. 

user-name  —— The name of the User to which the event belongs, ranging 

from 1 to 16 characters. By default, it is “public”. 

descript  ——  The description of the event, ranging from 1 to 16 characters. By 

default, it is empty. 

type  —— The event type, with none, log, notify and both options. None 

indicates no processing, log indicates logging the event, notify indicates sending 

trap messages to the management station, and both indicates logging the event 

and sending trap messages to the management station. 

owner-name  — —  The owner of the event entry, ranging from 1 to 16 

characters. By default, it is “monitor”. 

Global Configuration Mode 

Configure the user name of entry 1, 2, 3 and 4 as user1, the description of the 

event as description1, the type of event as log and the owner of the event as 

owner1: 

TL-SG3424(config)# rmon event 1-4 user user1 description description1 

type log owner owner1 

The  rmon alarm command is used to configure SNMP-RMON Alarm 

Management. To return to the default configuration, please use no rmon alarm 

command. Alarm Group is one of the commonly used RMON Groups. RMON 

alarm management allows monitoring the specific alarm variables. When the 

value of a monitored variable exceeds the threshold, an alarm event is 

generated, which triggers the switch to act in the set way. 

rmon alarm  index  interface gigabitEthernet  port [ alarm-variable  { drop | 

revbyte | revpkt | bpkt | mpkt | crc-lign | undersize | oversize | fragment | jabber | 

collision | 64 | 65-127 | 128-511 | 512-1023 | 1024-10240 }] [ s-type { absolute | 

delta} ] [ rising-threshold r-hold ] [ rising-event-index r-event ] [ falling-threshold