TP-LINK TL-WR543G User Manual

 

- 63 - 

address is proper MAC address, click the "Clone MAC Address" button and your PC’s 
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address 
into the "WAN MAC Address" field. The format for the MAC Address is 
XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting. 

 

Figure A-3  MAC Clone 

1)  If you start Netmeeting as a sponsor, you don’t need to do anything with the router. 

2)  If you start as a response, you need to configure Virtual Server or DMZ Host. 

3)  How to configure Virtual Server: Login to the router, click the “Forwarding” menu on the 

left of your browser, and click "Virtual Servers" submenu. On the "Virtual Server" page, 
click Add New, then on the “Add or Modify a Virtual Server” page,    enter “1720” into the 
blank behind the “Service Port”, and your IP address behind the IP Address, assuming 
192.168.1.169 for an example, remember to “Enable” and “Save”.   

Figure A-4  Virtual Servers 

 

A-5    Add or Modify a Virtual server Entry 

) 

Your opposite side should call your WAN IP, which is displayed on the “Status” page. 

4)  How to enable DMZ Host: Login to the router, click the “Forwarding” menu on the left of 

your browser, and click "DMZ" submenu. On the "DMZ" page, click “Enable” radio and 
type your IP address into the “DMZ Host IP Address” field, using 192.168.1.169 as an 
example, remember to click the "Save” button.