TP-LINK TL-R480T+ User Manual

 

-104-

 

● 

The default Web Management Port is 80. If the port is changed, you should type “http://IP address: 

port” to login the router. E.g.: If the Web Management Port is changed to 88, type 

http://192.168.0.1:88 in the address filed to login the router. 

● 

The new timeout period will take effect when next login. 



  Network Requirements 

Allow the IP address within 210.10.10.0/24 segment to manage the router with IP address of 
210.10.10.50 remotely.   



  Configuration Procedure 

Type 210.10.10.0/24 in the Subnet/Mask field on Remote Management page and enable the entry as the 
following figure shows. 

 

Then type the corresponding port number in Web Management Port and Telnet Management Port fields 
as the following figure shows. 

 

Finally, start the web browser and type 210.10.10.50 in the URL field to log in the Web management 
page of the router. 

On this page you can configure the Remote Management function. This feature allows managing your 
router from a remote location via the Internet. 

Choose the menu Maintenance→Setup→Remote Management to load the following page.