TP-LINK TL-WA830RE User Manual
TL-WA830RE
300Mbps Wireless N Range Extender User Guide
¾
QSS Status - To enable or disable the QSS function here.
¾
Current PIN - The current value of the device's PIN is displayed here. The default PIN of the
device can be found in the label or User Guide.
device can be found in the label or User Guide.
¾
Restore PIN - Restore the PIN of the device to its default.
¾
Gen New PIN - Click this button, and then you can get a new random value for the device's
PIN. You can ensure the network security by generating a new PIN.
PIN. You can ensure the network security by generating a new PIN.
¾
Add device - You can add a new device to the existing network manually by clicking this
button.
button.
)
Note:
The QSS function is only available when the Operation Mode is set to Access Point.
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and device using either Push Button Configuration (PBC)
method or PIN method.
connection between wireless adapter and device using either Push Button Configuration (PBC)
method or PIN method.
)
Note:
To build a successful connection by QSS, you should also do the corresponding configuration of
the new device for QSS function meanwhile.
the new device for QSS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
example.
Method One:
Step 1: Keep the QSS Status as Enabled and click the Add device button in Figure 4-2, then
the following screen will appear.
Figure 4-3 Add A New Device
Step 2: Choose “Press the button of the new device in two minutes” and click Connect.
Step 3: For the configuration of the wireless adapter, please choose “Push the button on my
access point” in the configuration utility of the QSS as below, and click Next.
19