TP-LINK TL-WR 841 N User Manual

 

- 24 - 

3.  If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. Then 

should enter the following parameters (Figure 4-8):

 

 

Figure 4-8 

  WAN - PPPoE

 

¾

 

User Name/Password - Enter the User Name and Password provided by your ISP. These 

fields are case-sensitive. 

¾

 

Secondary Connection - It’s available only for PPPoE Connection. If your ISP provides an 

extra Connection type such as Dynamic/Static IP to connect to a local area network, then you 

can check the radio button of Dynamic/Static IP to activate this secondary connection. 

z

 

Disabled  - The Secondary Connection is disabled by default, so there is PPPoE 
connection only. This is recommended. 

z

 

Dynamic IP  -  You can check this radio button to use Dynamic IP as the secondary 
connection to connect to the local area network provided by ISP. 

z

 

Static IP - You can check this radio button to use Static IP as the secondary connection 
to connect to the local area network provided by ISP. 

¾

 

Connect on Demand - In this mode, the Internet connection can be terminated automatically 

after a specified inactivity period (Max Idle Time) and be re-established when you attempt to 

access the Internet again.  If you want your Internet connection keeps active all the time, 

please enter “0” in the Max Idle Time field.

 

Otherwise, enter the number of minutes you want