TP-LINK TL-WR 841 N User Manual

 

- 46 - 

 

Figure 4-30    Add or Modify an Address Reservation Entry 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable/Disable All button to make all entries enabled/disabled 

Click the Delete All button to delete all entries. 

Click the Next button to go to the next page and Click the Previous button to return the previous 
page. 

 

 

 

Figure 4-31 The Forwarding menu 

There are four submenus under the Forwarding menu (shown in Figure 4-31), Virtual Servers, 
Port Triggering,  DMZ and UPnP. Click any of them, and you will be able to configure the 
corresponding function. 

Choose menu “Forwarding  → Virtual Servers”, you can view and add virtual servers in the 
screen as shown in Figure 4-32. Virtual servers can be used for setting up public services on 
your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all 
requests from the Internet to this service port will be redirected to the computer specified by the 
server IP. Any PC that was used for a virtual server must have a static or reserved IP Address 
because its IP Address may be changed when using the DHCP function.