TP-LINK TL-SG2109WEB User Manual
15
Web Smart Gigabit Switch Family User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
4.2.4 Port Description
Use a description word to indicate the port.
4.3 Network Setting
The network module provides the function of setting switch IP address,
dynamic binding and aging time, configuring static MAC address and filtering
MAC address, displaying dynamic bound address and ping.
dynamic binding and aging time, configuring static MAC address and filtering
MAC address, displaying dynamic bound address and ping.
4.3.1 Switch IP Address
An IP address is indispensable for a switch to be accessed. TheTL-
SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-
SL2452WEB Web-Smart Switch Family provides the configuration interface of
IP address, netmask and default gateway.
SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-
SL2452WEB Web-Smart Switch Family provides the configuration interface of
IP address, netmask and default gateway.
DHCP (Dynamic Host Configuration Protocol) is dedicated for the DHCP client
to obtain IP configuration information from the DHCP server. Two types of
information are included in IP configuration information. One type is specific
configuration information; another is IP address parameter. DHCP is based
on client-server mode. The network station that offers the IP configuration
information is called DHCP server.
to obtain IP configuration information from the DHCP server. Two types of
information are included in IP configuration information. One type is specific
configuration information; another is IP address parameter. DHCP is based
on client-server mode. The network station that offers the IP configuration
information is called DHCP server.
Make sure that a DHCP server is correctly connected to the network, enable
the DHCP client function of the switch, then the switch will automatically obtain
IP address, netmask and default gateway from the DHCP server.
If more than one DHCP servers are available in the network, the switch will
choose one according to a specific algorithm.
the DHCP client function of the switch, then the switch will automatically obtain
IP address, netmask and default gateway from the DHCP server.
If more than one DHCP servers are available in the network, the switch will
choose one according to a specific algorithm.