TP-LINK TL-SG3424P User Manual
Figure 4-5 System Time
The following entries are displayed on this screen:
¾
Time Info
Current System Date:
Displays the current date and time of the switch.
Current Time Source:
Displays the current time source of the switch.
¾
Time Config
Manual:
When this option is selected, you can set the date and time
manually.
manually.
Get Time from NTP
Server:
Server:
When this option is selected, you can configure the time zone and
the IP Address for the NTP server. The switch will get time from
NTP server automatically if it has connected to a NTP server.
the IP Address for the NTP server. The switch will get time from
NTP server automatically if it has connected to a NTP server.
z
Time Zone: Select your local time.
z
Primary/Secondary NTP Server: Enter the IP Address for the
NTP server.
NTP server.
z
Update Rate: Specify the rate fetching time from NTP server.
Synchronize with
PC’S Clock:
PC’S Clock:
When this option is selected, the administrator PC’s clock is
utilized.
utilized.
Note:
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.
4.1.4 Daylight Saving Time
On this page you can configure the Daylight Saving Time of the switch.
15