TP-LINK TL-WR 841 ND User Manual

 

TL-WR841N/TL-WR841ND

 

-18- 

country or region is not listed, please contact your local government agency for 

assistance. 

)

 

Limited by local law regulations, version for North America does not have region selection option. 

¾

  Mode - This field determines the wireless mode which the router works on. 

¾

  Channel Width - Select any channel width from the pull-down list. The default setting is 

automatic, which can adjust the channel width for your clients automatically. 

¾

  Channel - This field determines which operating frequency will be used. The default 

channel is set to Auto, so the AP will choose the best channel automatically. It is not 

necessary to change the wireless channel unless you notice interference problems with 

another nearby access point. 

¾

  Disable Security - The wireless security function can be enabled or disabled. If 

disabled, the wireless stations will be able to connect the router without encryption. It is 

recommended strongly that you choose one of following options to enable security. 

¾

  WPA/WPA2-Personal - Select WPA based on pre-shared passphrase.   

z

 

PSK Password - You can enter ASCII or Hexadecimal characters.   

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the 

length should be between 8 and 63 characters. 

For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, 

the length should be between 8 and 64 characters. 

Please also note the key is case sensitive, this means that upper and lower case 

keys will affect the outcome. It would also be a good idea to write down the key and 

all related wireless security settings.   

¾

  No Change - If you chose this option, wireless security configuration will not change! 

These settings are only for basic wireless parameters. For advanced settings, please refer to 

4.6 Wireless.  

6. Click 

the 

Finish button to complete the Quick Setup.  

 

Figure 3-13    Quick Setup – Finish