TP-LINK TL-WR 841 ND User Manual

 

TL-WR841N/TL-WR841ND

 

-85- 

3.  Click the Upgrade button. 

)

1.  New firmware versions are posted at http://www.tp-link.com and can be downloaded for free. 

There is no need to upgrade the firmware unless the new firmware has a new feature you 

want to use. However, when experiencing problems caused by the router rather than the 

configuration, you can try to upgrade the firmware. 

2.  When you upgrade the router's firmware, you may lose its current configurations, so before 

upgrading the firmware please write down some of your customized settings to avoid losing 

important settings. 

3.  Do not turn off the router or press the Reset button while the firmware is being upgraded, 

otherwise, the router may be damaged. 

4.  The router will reboot after the upgrading has been finished. 

Choose menu “System Tools  → Factory Defaults”, and you can restore the configurations of 

the router to factory defaults on the following screen 

 

Figure 4-77 Restore Factory Default 

Click the Restore button to reset all configuration settings to their default values.   

• 

The default User Name: admin 

• 

The default Password: admin 

• 

The default IP Address: 192.168.0.1 

• 

The default Subnet Mask: 255.255.255.0 

)

Any settings you have saved will be lost when the default settings are restored. 

Choose menu “System Tools  →  Backup & Restore”, you can save the current configuration of 

the router as a backup file and restore the configuration via a backup file as shown in Figure 4-75.