TP-LINK TL-SG3210 User Manual

Figure10-8 Create Extend-IP Rule

The following entries are displayed on this screen:



Create Extend-IP ACL

ACL ID:

Select the desired Extend-IP ACL for configuration.

Rule ID:

Enter the rule ID.

Operation:

Select the operation for the switch to process packets which match the
rules.


Permit: Forward packets.



Deny: Discard Packets.

S-IP:

Enter the source IP address contained in the rule.

D-IP:

Enter the destination IP address contained in the rule.

Mask:

Enter IP address mask. If it is set to 1, it must strictly match the
address.

IP Protocol:

Select IP protocol contained in the rule.

TCP Flag：

Configure TCP flag when TCP is selected from the pull-down list of IP
Protocol.

S-Port:

Configure TCP/IP source port contained in the rule when TCP/UDP is
selected from the pull-down list of IP Protocol.

D-Port:

Configure TCP/IP destination port contained in the rule when
TCP/UDP is selected from the pull-down list of IP Protocol.

DSCP:

Enter the DSCP information contained in the rule.

IP ToS:

Enter the IP-ToS contained in the rule.

135