TP-LINK TL-SG3216 User Manual

 

 

¾

 

z

 

Configure Switch A 

1 Configure the 

Link Type of the 
ports 

Required. On VLAN→802.1Q VLAN→Port Config page, configure the 
link type of Port 11 and Port 13 as ACCESS, and configure the link type 
of Port 12 as GENERAL. 

2 Create 

VLAN10 Required. 

On 

VLAN→802.1Q VLAN→VLAN Config page, create a 

VLAN with its VLANID as 10, owning Port 12 and Port 13, and 
configure the egress rule of Port 12 as Untag.   

3 Create 

VLAN20 Required. 

On 

VLAN→802.1Q VLAN→VLAN Config page, create a 

VLAN with its VLANID as 20, owning Port 11 and Port 12, and configure 
the egress rule of Port 12 as Untag.   

z

 

Configure Switch B 

1 Configure the 

Link Type of the 
ports 

Required. On VLAN→802.1Q VLAN→Port Config page, configure the 
link type of Port 4 and Port 5 as ACCESS, and configure the link type of 
Port 3 as GENERAL.   

2 Create 

VLAN10 Required. 

On 

VLAN→802.1Q VLAN→VLAN Config page, create a 

VLAN with its VLANID as 10, owning Port 3 and Port 4, and configure 
the egress rule of Port 3 as Untag.   

3 Create 

VLAN20 Required. 

On 

VLAN→802.1Q VLAN→VLAN Config page, create a 

VLAN with its VLANID as 20, owning Port 3 and Port 5, and configure 
the egress rule of Port 3 as Untag.   

4 Create 

Protocol 

Template 

Required. On VLAN→Protocol VLAN→Protocol Template page, 
configure the protocol template practically. E.g. the IP network packets 
are encapsulated in Ethernet II format and its Ether Type is 0800; the 
AppleTalk network packets are encapsulated in SNAP format and its 
PID is 809B.   

65