TP-LINK TL-SG3424P User Manual

 

92

 

Interface Configuration Mode（interface ethernet / interface range ethernet） 

Enable Port Security function for port1, select Static mode as the learn mode, 

and specify the maximum number of MAC addresses that can be learned on 

this port as 30:     

1 

  max-number  30  mode 

static status enable 

The bridge address static command is used to add the static MAC address 

entry. To remove the corresponding entry, please use no bridge address static 

command. The static address can be added or removed manually, independent 

of the aging time. In the stable networks, the static MAC address entries can 

facilitate the switch to reduce broadcast packets and enhance the efficiency of 

packets forwarding remarkably. 

{mac mac} {vid vid} {port port} 

[mac] [vid] [port] 

mac  ——

The MAC address of the entry you desire to add. 

vid  ——

  The VLAN ID number of your desired entry. It ranges from 1 to 4094. 

port  ——

  The Port number of your desired entry.   

Global Configuration Mode 

Add a static Mac address entry to bind the MAC address 00:02:58:4f:6c:23, 

VLAN1 and Port1 together: 

00:02:58:4f:6c:23 vid 1 port 1