TP-LINK TL-SG3424P User Manual

 

104

 

User EXEC Mode and Privileged EXEC Mode 

Test the connectivity between the switch and the network device with the IP 

192.168.0.131. If the destination device has not been found after 20 maxHops, 

the connection between the switch and the destination device is failed to 

establish: 

192.168.0.131 20 

The loopback command is used to test whether the port is available or not. 

 {port} { internal | external } 

  ——  The number of the port which is selected for loopback test.   

internal | external —— Loopback Type. There are two options, Internal and 

External. 

User EXEC Mode and Privileged EXEC Mode 

Do a Internal-type loopback test for port 4:     

4 internal 

The  show system-info command is used to display System Description, 

Device Name, Device Location, System Contact, Hardware Version, Firmware 

Version, System Time, Run Time and so on.