TP-LINK TL-SG3424P User Manual

 

174

 

privacy mode guarantee the high security for the communication between the 

management station and the managed device. 

 {name} [smode { v1 | v2c | v3 }] [slev { noAuthNoPriv | 

authNoPriv | authPriv }] [ro ro-view] [wo wo-view] [notify notify-view] 

{name} {smode { v1 | v2c | v3 }} {slev { noAuthNoPriv | 

authNoPriv | authPriv }} 

  ——The SNMP Group name, ranging from 1 to 16 characters. The Group 

Name, Security Model and Security Level compose the identifier of the SNMP 

Group. These three items of the Users in one group should be the same. 

smode  —— Security Model, with v1、v2c and v3 options. They represent 
SNMP v1, SNMP v2c and SNMP v3. SNMP v1 and SNMP v2c are both 
authenticated by Community Name (please refer snmp community-add  for 
detailed information), SNMP v3 is authenticated by 

USM mechanism. 

By default

, 

the Security Model is v1. 

slev  —— The Security Level of SNMP v3 Group. There are three options, 
including noAuthNoPriv（no authorization and no encryption）、authNoPriv
（

authorization and no encryption） and authPriv（authorization and encryption）. 

By default, the Security Level is noAuthNoPriv. There is no need to configure 
this in SNMP v1 Model and SNMP v2c Model.   

  — —  Read-only view. The management access is restricted to 

read-only, and changes cannot be made to the assigned SNMP View. 

  —— Write-only view. The management access is writing only and 

changes can be made to the assigned SNMP View. The View defined both as 
the Read View and the Write View can be read and modified. 

  ——  Notify view. The management station oftware can receive trap 

messages of the assigned SNMP view generated by the Switch's SNMP agent.     

Global Configuration mode 

Add group 1, configure its Security Model as SNMP v2c, view1 can be read and 
edited by group member, and the trap messages sent by view2 can be received 
by Management station: 

group1 smode v2c ro view1 wo view1 

 view2