Manualsbrain.com
  1. Manuals
  2. Brands
  3. TP-LINK
  4. TL-SG3424P
  5. User Manual

TP-LINK TL-SG3424P User Manual

Download
Page of 220
 
194
 
lldp tlv-select 
Description 
The  lldp tlv-select command is used to configure TLVs to be included in 
outgoing LLDPDU. To exclude TLVs, please use no lldp tlv-select command. 
By default, All TLVs are included in outgoing LLDPDU. 
Syntax 
lldp tlv-select 
[port-description] [system-capability] [system-description] 
[system-name] [management-address] [port-vlan-id] [protocol-vlan-id] 
[vlan-name] [link-aggregation] [mac-phy] [max-frame-size] [power] [all] 
no lldp tlv-select 
[port-description] [system-capability] [system-description] 
[system-name] [management-address] [port-vlan-id] [protocol-vlan-id] 
[vlan-name] [link-aggregation] [mac-phy] [max-frame-size] [power] [all] 
Command Mode 
Interface Configuration Mode（interface ethernet / interface range ethernet） 
Example 
Exclude “management-address” and “port-vlan-id” TLVs in LLDPDU outgoing 
from port 8: 
TP-LINK(config)# interface ethernet 
8 
TP-LINK(config-if)# no lldp tlv-select 
management-address port-vlan-id 
lldp med-status 
Description 
The lldp med-status command is used to enable the port’s LLDP-MED status. 
Enable the port's LLDP-MED status, and the port's Admin Status will be 
changed to Tx&Rx. To disable LLDP-MED status, please use no lldp 
med-status 
command. 
Syntax 
lldp med-status 
{enable } 
no lldp med-status   
Parameter 
enable
  ——  Enable the port's LLDP-MED status, and the port's Admin Status 
will be changed to Tx&Rx.   
Command Mode