TP-LINK TL-SG3424P User Manual

 

55

 

Configure the port 2 to be a Trusted Port: 

2 

 

The  dhcp-snooping mac-verify command is used to enable the MAC Verify 

feature. To disable the MAC Verify feature, please use no dhcp-snooping 

 command. There are two fields of the DHCP packet containing the 

MAC address of the Host. The MAC Verify feature is to compare the two fields 

and discard the packet if the two fields are different. 

 

Interface Configuration Mode（interface ethernet / interface range ethernet） 

Enable the MAC Verify feature for the port 2: 

2 

 

The  dhcp-snooping rate-limit command is used to enable the Flow Control 

feature for the DHCP packets. The excessive DHCP packets will be discarded. 

To restore to the default configuration, please use no dhcp-snooping rate-limit 

command. 

dhcp-snooping rate-limit    value