TP-LINK tl-sl5428e User Manual
Choose the menu ACL→ACL Config→MAC ACL to load the following page.
Figure10-6 Create MAC Rule
The following entries are displayed on this screen:
Create MAC-Rule
ACL ID:
Select the desired MAC ACL for configuration.
Rule ID:
Enter the rule ID.
Operation:
Select the operation for the switch to process packets which match the
rules.
rules.
Permit: Forward packets.
Deny: Discard Packets.
S-MAC:
Enter the source MAC address contained in the rule.
D-MAC:
Enter the destination MAC address contained in the rule.
MASK:
Enter MAC address mask. If it is set to 1, it must strictly match the
address.
address.
VLAN ID:
Enter the VLAN ID contained in the rule.
EtherType:
Enter EtherType contained in the rule.
User Priority:
Select the user priority contained in the rule for the tagged packets to
match.
match.
Time-Range:
Select the time-range for the rule to take effect.
10.2.4 Standard-IP ACL
Standard-IP ACLs analyze and process data packets based on a series of match conditions, which
can be the source IP addresses and destination IP addresses carried in the packets.
can be the source IP addresses and destination IP addresses carried in the packets.
Choose the menu ACL→ACL Config→Standard-IP ACL to load the following page.
139