Trendnet TEW-510APB User Manual

Page of 29
 
 
 
          
 
                                                                                                                                                     
                                                                                                                                             
                                                                      
User’s Guide  
13
4.3 Wireless – Wireless Mode 
There are 3 operating modes in each A,B/G band, using the following setting can perform each function. 
 
Wireless-A Settings 
Access Point: This mode provides access for wireless stations to wired LANs and from wired LANs to wireless 
stations. This mode is not only performing AP function but also support WDS connection. Input remote AP’s MAC 
address in below 4 fields can generate 4 WDS connections with this AP. 
 
Repeater:  
This  mode can be a repeater in your WLAN architecture. Input a SSID that you want to associate in right 
field. 
 
Wireless Client: 
This  mode can be a client as general WLAN card in your WLAN architecture. Input a SSID that you 
want to associate in right field. Using one computer with Ethernet interface to connect this device, then the computer 
will has capacity of WLAN association. 
 
Wireless-G Settings 
Access Point: This mode provides access for wireless stations to wired LANs and from wired LANs to wireless 
stations. This mode is not only performing AP function but also support WDS connection. Input remote AP’s MAC 
address in below 4 fields can generate 4 WDS connections with this AP. 
 
Repeater:  
This  mode can be a repeater in your WLAN architecture. Input a SSID that you want to associate in right 
field. 
 
Wireless Client: 
This  mode can be a client as general WLAN card in your WLAN architecture. Input a SSID that you 
want to associate in right field. Using one computer with Ethernet interface to connect this device, then the computer 
will has capacity of WLAN association. 
 
 
 
Change these settings as described here and click the Apply button to apply your changes or click Cancel button to 
cancel your changes. For additional information, click Help