Trendnet TW100-W1CA User Manual

 

You can use terminal emulation on your PC/workstation for the initial and future configuration 
of your product. Windows HyperTerminal or other terminal emulation applications can be 
used.  

If you prefer, a telnet session can be opened directly.  Telnet provides the same type of 
terminal emulation.  For security purposes, the product uses port 333 for telnet. All of the 
following Terminal Mode Configuration menus are identical in the telnet session, with the 
exception that any saved changes  that result in the product rebooting, will require user to 
open a new telnet session to reestablish a connection with the product. For more information 
on telnet configuration, please see “How to Start Telnet” section below. 

1. 

Power off the Internet Station. 

2. 

Connect an RS-232 cable from one Serial COM port on your PC to your product’s Serial 
Console port 

3. 

In Windows, go to Start?Program?Accessories ?Communications?HyperTerminal. 

4. 

When the HyperTerminal window appears, double-click Hypertrm to start a new session. 

5. 

Name the new connection and select an icon for this session.  

6. 

In the Connect To dialog box, select the COM port that you used to connect to the 
Internet Station.  

 

7. 

When the dialog box in Figure 18 appears, select the Bits per second rate as 38400, and 
Flow control at None. Click OK to complete the setting. See Figure 18.