Trendnet VoIP Gateway User Manual
TVP-221H User’s Guide
30
iii. Manual: Enables gatekeeper co-operation in manual
operation (the gatekeeper address must be properly
assigned).
assigned).
The following fields must be filled in when Gate Keeper Mode is set to
manual.
manual.
2. Gate Keeper Address: Specify the gatekeeper address when configured
to manual mode. When auto mode is desired, this field should be set to
auto
auto
3. Allow Calls Without Gate Keeper: This field is to inform the H.323
stack to allow calls when the endpoint is not registered with a gatekeeper.
4. Registration Type: This field is to set the endpoint registration type.
This specifies how the endpoint will register itself with the gatekeeper.
5. Max Registration Retries: This field is to control how many registration
attempts will be made before the endpoint considers itself to have failed
registration.
registration.
6. Time To Live: Do not have to set this because GK to perform this
function. Every x seconds will check to see if it is alive
7. Endpoint Prefix: This command is used to set the H.323 prefix that the
TVP-221H uses when registering to an H.323 gatekeeper.
8. Terminal ID: To specify GW’s ID.
9. GateKeeper ID: To specify Gate Keeper’s ID.
You'll have to reboot the system to make your changes take effect!