Trendnet VoIP Gateway User Manual

TVP-221H User’s Guide 

87

 

To use Telnet, Internet Access must have been previously setup so that the gateway 
is visible on the internet (See User Guide for More Information). Alternatively, you can 
use Telnet to locally access the TVP-221H, if you are under a router or switch and the 
TVP-221H and your computer are in the same network segment.  

To access the TVP-221H Gateway from a remote location / or from the same LAN 
Segment using Telnet, perform the following tasks:  

Task 

Prompt 

Type 

Open the windows command prompt and enter the telnet 
command followed by the IP address of the TVP-221H 
Gateway you want to access. 

None 

telnet 
xxx.xxx.xxx 

When the TVP-221H Gateway prompts you to Login, 
enter the user name "admin” 

Login: 

admin 

When the TVP-221H Gateway prompts you for the 
Password, enter the password. The default password is 
"123" but it is recommended that the password be 
changed for security considerations.  The password can 
be changed from the Web UI Administration / Password 
submenu page.  

Password
: 

123 

Type in “ping xxx.xxx.xxx”, where xxx.xxx.xxx is your ISP 
provided DNS Server IP or any known Public Internet 
Address. The following dialogue confirms Internet Access 
 

 
If the ping times out, you do not have Internet Access or 
the Public IP Address you pinged is incorrect. Try another 
IP Address. If you confirm that you do not have Internet 
Access, please refer to the trouble shooting section of the 
User Manual or consult your ISP to make sure your 
Internet Access Data is correct and accurately entered 
into the TVP-221H.  

Console> 

ping 
xxx.xxx.xxx